How to install your ecobee SmartThermostat with voice control
In most homes, installing an ecobee thermostat is an easy process that takes about 45 minutes. Follow the steps below or scroll down for installation guides, wiring diagrams, troubleshooting tips and more.
- Check compatibility with your HVAC system
- Download the ecobee app for step-by-step installation instructions
Guides and manuals
Wiring diagrams
Other installation resources
Getting started with your ecobee
If your ecobee doesn’t turn on, please try these steps.
Check that all wires are properly inserted into the terminal blocks at the thermostat. Tug on the wires to ensure they are not loose.
Make sure your HVAC cover panel is closed. Some systems will not turn on if the cover panel has not been closed properly.
If you have only one R wire (either R, Rc, or Rh), make sure it’s inserted into the Rc terminal.
If you installed the Power Extender Kit, make sure you inserted the wires into the correct terminals.
Meet your ecobee SmartThermostat
Here's what you'll find in the box
Kit (PEK)
Also included
Screws and drywall plugs
Wire labels
Installation guide
Tools you'll need
Required
Drill (3/16” drill bit)
Flathead screwdriver
Phillips screwdriver
Optional
Hammer
Pencil
Wire stripper