ecobeelogo ecobeelogo ic_roomsensor_tstat_CA22 A9D321DF-71AF-4F89-8E7C-9AD74BC9025872

How do I set up HomeKit on my HomeKit-enabled ecobee3?

How do I set up HomeKit on my HomeKit-enabled ecobee3?

Setting up and using HomeKit requires a HomeKit-enabled ecobee3. You can check to see if your ecobee is HomeKit enabled.

To set up and pair your ecobee with HomeKit, just open up your ecobee mobile app and follow the instructions below:

  1. Tap on the green Menu icon in the upper right corner.
  2. Tap on Add HomeKit-enabled ecobee3.
  3. Tap on Add Home if you don’t have your Home set up.
  4. Enter the name of your Home and tap Done.
  5. Tap on Add. Your HomeKit code should appear on your thermostat. (*If you have more than one ecobee, tap Say Hi to make sure you’re connecting to the right one.)
  6. Point your iPhone camera at the thermostat. You will see Paired with HomeKit on your thermostat.
  7. A default room will be created (you can change this later). Click Next.
  8. Success! You’ll see the 5 default commands you can start using! Click Done.

 

Instructions with visual guides

Step 1: Tap on the green Menu icon in the upper right corner.

Step1-320

Step 2: Tap on Add HomeKit-enabled ecobee3.

Step2-320

Step 3: Tap on Add Home if you don’t have your Home set up.

Step3-320

Step 4: Enter the name of your Home and tap Done.

Step4-320

Step 5: Tap on Add. Your HomeKit code should appear on your thermostat.

Step5-320

*If you have more than one ecobee, tap Say Hi to make sure you’re connecting to the right one.

Step 6: Point your iPhone camera at the thermostat. You will see Paired with HomeKit on your thermostat.

step6-320

Step 7: A default room will be created (you can change this later). Click Next.

Step7-320

Step 8: Success! You’ll see the 5 default commands you can start using! Click Done.

Step8-320
On the same topic